|
Moisture-Seal is a water-based, rubberized, exterior waterproofing
that is applied cold and cures to form a flexible, seamless
membrane.
-
No
priming or heating needed for application
-
Cold
applied with sprayer or brush
-
Environmentally friendly – no solvent content
-
Non
flammable & safe for the applicators
-
Cures
to form a highly flexible, seamless, elastomeric waterproof
membrane
-
Safe
for use on ICF and styrofoam board
-
Adheres to all substrates including wood, metal, EPS block, SIP or
OSB panels
-
Can be
applied to damp surfaces and green concrete
-
High
SBR rubber content means product will bridge cracks up to 1/16”
wide
-
Life
Time Warranty on product performance (see warranty)
-
Can be
used above grade as a vapor barrier
-
Highly
flexible - +950%
-
Cleans
up with water before drying, mineral spirits when dry
-
Can be
used under tiles in showers and other wet areas
-
Economical, quality waterproofing for new construction or
renovation
-
Apply
in temperatures down to 20F
Moisture-Seal is a water-based, liquid rubber exterior foundation
coating that can be applied in temperatures below freezing. This
exceptional product is solvent free, non flammable, and
environmentally friendly. Unlike other similar products on the
market, Moisture-Seal is not destroyed by freezing. If freezing
occurs, thaw, stir well and apply. Short periods of freezing will
not affect the quality or performance of the product.
Moisture-Seal provides economical, quality waterproof protection
that can now be applied all year round.
The ideal product for ICF builders still using peel & stick
|
